Category: Custom Builds

Colin wanted a tandem tricycle, but using a standard Rohloff hub gear, in a tadpole instead of a delta configuration for stability.

The frame was made out of Columbus steel tubing, triangulated and braced for stability.

Gavin’s Racerunner was built from thin-wall Columbus Gara tubing, for a frame weight of around 4kg, and a total built-up weight of under 10kg.

The frame was built on a custom jig to be perfectly straight, and has adjustable fore and aft positioning of the saddle, and adjustable chest plate using a seatpost.

A series of axle inserts allow different wheels to be used, and the camber can also be adjusted.

Cost was £1500 for the frame, inserts, painting and assembly.

I just finished building up this bike – the Helios is a very adjustable aluminium frame, and with the removable seat posts and stem it also packs down very well.

For this one, I had the frame repainted, and fitted a Rohloff hub and Hope disc brakes.

A Hase Trets childs’ tricycle fitted with a custom motor system…

With 4″ tyres, the Pugsley is built to happily trundle over snow, sand, gloopy mud, small children, and pretty much anything else you point it at. This one has a Rohloff 14-speed gear in the back, and a SON Delux front dynohub powering an 80-lux Edelux light.

A DiBlasi trike fitted with an electric motor – I remember this being an incredibly fiddly job…

Built for a child with special needs, this will tow behind any bike using a standard Chariot hitch – just finished it off today after a manic weekend of building…